Press mechanism control unit in Geesink GPM 2 compactors

teclimur-cabecera-geesink
In this area we offer the main hydraulic unit for the press plate in Gesink GPM 2 compactors as well as the related spare parts.

We have a large stock of the suitable hydraulic control units for Geesink GPM 2 and GPM 3 compactors.

We can offer the complete hydraulic operational unit for the press plate in Geesink GPM II compaction trucks.

You can also choose between the different components separately to repair your own hydraulic unit: alluminium hydraulic block, electrovalves, coils, couplings and the different connection components.

Due to the wide variety of spare parts, we recommend you to study the technical information shown on each spare part and, if needed, call us at +34 968 676912 or email us at info@teclimur.com and we will help you find the correct reference.

0,5 bar ø16x1/2” check valve for the DOWN function connection in the main hydraulic block of Geesink GPM 2 compactors

45996
Compatible with Geesink original reference 581130*

Applicable to Geesink GPM 2 and Geesink GPM 3 compactors.

Function: Backward leap.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

6 bar TK2 non return valve for the main control block of the press plate in Geesink GPM 2 compactors

46041
Compatible with Geesink original reference 944015*

Applicable to Geesink GPM 2 compactors.

Function: Supply.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Complete control unit for the press mechanism in Geesink GPM 2

45955
Compatible with Geesink original reference 223350*

Complete hydraulic controller for the press plate in Geesink RCV.

Applicable to Geesink GPM 2.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Manifold hydraulic control block made of alluminium for the BV3/BV4 press plate mechanism in Geesink GPM 2 compactors

45954
Compatible with Geesink original reference 223347*

Applicable to Geesink GPM 2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Complete BV4 manoeuvre valve (without TK1 valve) for the main control block in Geesink GPM II compactors

46046
Compatible with Geesink original reference 946008*

Applicable to Geesink GPM 2 compaction trucks.

Control of the press and down mechanisms.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

BV3 complete manoeuvre valve (with TK1 valve) for the main control block in Geesink GPM 2 compactors

46047
Compatible with Geesink original reference 946015*

For actuation of the mechanisms of opening and collection of the press plate compactors Geesink GPM 2.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Gate for check manometer in main hydraulic control block in Geesink GPM 2 compactors

46011

Compatible with Geesink original references 590090* / 222263*

Fast coupling checking gate installed on the main control block of the hydraulic cylinder in charge of the ejection plate ejection in Geesink GPM 2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Overpressure relieve valve in main control block of Geesink GPM 2 compactor

46030
Compatible with Geesink original reference 941151*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Seal kit for overpressure relieve valve on main control block of the press plate in Geesink compactors

46160
 
Compatible with Geesink original reference 941151-G*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

SRV3 flow regulation valve on the main hydraulic control block for the press mechanism and the combined valve in Geesink GPM 2 compactors

46034
Compatible with Geesink original reference 943018*

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

4/3 manoeuvre valve with solenoids for the main control block in Geesink GPM II compactors

46044
Compatible with Geesink original references 946006* / 946003* / 220693*

Coils and solenoids included.

Applicable to the elevation / lift control unit in Geesink GPM II / STEUER HECKTEILZYL / GPMII STEUER PRESS MECH. 

4/3 manoeuvre valve installed on the hydraulic cylinder control unit in charge of the tail gate elevation in Geesink GPM 2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Complete control unit for the press mechanism in Geesink GPM 2 compactors

45039
Compatible with Geesink original reference 940110*

24V solenoid for 4/3-4/2 control valves.

Outer diameter 45 mm.

Inner diameter 22 mm.

Height 53 mm.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Seal kit for the main hydraulic control block for the compaction plate (FP1VW1CNJW75X868) in Geesink GPM 2 compactors

46161

Compatible with Geesink original reference 441851*

Torique seals / joints kit for the main hydraulic control block for the press plate and for the 4/3 way manoeuvre valve. Installed in the control unit of the ejector cylinder of the ejection plate  to elevate the rear section in Geesink GPM II compactors.

It is also used to repair the 4/3 ways manoeuvre valve installed on the superior part of the ejector cylinder control unit.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Reducer fitting for the 6 bar TK2 non-return valve for the main control block of the press plate in compactors Geesink GPM 2

46128
Compatible with Geesink original reference 553135*

It is a fitting reducer that allows the installation of the TK2 overpressure valve  in the block that controls the mechanism of press plate on compactors  Geesink GPM II.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Filter element for the SRV3 valve on the main hydraulic block of the press plate in Geesink GPM 2 compactors

45953
Compatible with Geesink original reference 223340*

Applicable to Geesink GPM 2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.