Haller X2 - Pressing mechanism, swivel, guide plate and tail gate elevation

teclimur-cabecera-haller

In this area you will find all the elements of the mechanism in charge of the pressing plate movement (guide plate and swivel) in your Haller X2 compactor.

 

 

 

We can offer you all the components of the collection and pressing mechanism of Haller X2 RCV compactor.

We have the entire structures of the swivel and guide plate, the hydraulic cylinders in charge of it actioning and the different pins, bushings, safety plates or rollers that keep them assembled.

Select the spare parts among the list of references you can find below or click on the menu on your left where your Haller compactor appears so that you could display a list of all the available spare parts for your machine.

If you cannot find on this website the parts you need, please contact our customer service at +34 968 676912 or send us an email to info@teclimur.es and we will help you locate the correct part for your Haller compactor.

Complete swivel plate for Haller X2 compactors, manufactured after August 1994

91107
91107_haller_101339_20160322163944
Compatible with Haller original references 101339* / 126495* / 101.339* / 126.495* /101 339* / 126 495*

Applicable to Haller X2 compactors.

It is the lower swivel plate that collects the wastes in the hopper.

Each Haller X2 needs 1 swivel.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø70x60 mm height 60 mm bushing for the swivel articulation in Haller X2 compactors

91109
91109_haller_348255_20160322163944
Compatible with Haller original references 348255* / 125439* / 348.255* / 125.439* / 348 255* / 125 439*

Applicable to Haller X2 compactors.

Bushing for the articulation pin of the swivel-guide plate section in Haller X2 RCV compaction trucks.

Each Haller X2 needs 2 bushings, one on each swivel pivot point.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Guide plate for Haller X2 compactors

91108
91108_haller_402066_20160322163944
Compatible with Haller original references 402066* / 402.066* / 402 066*

Applicable to Haller X2 compactors.

It is the upper press plate on which the swivel that collects the wastes in the hopper is articulated.

Each Haller X2 needs 1 guide plate.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø229x60 mm upper articulation pin with lubrication hose for the guide plate in Haller X2 compactors

91116
91116_haller_401049_234988  5100878_20160322163944
Compatible with Haller original references 401049* / 234988* / 5100878* / 401.049* / 234.988* / 510.0878* / 401 049* / 234 988* / 510 0878*

Applicable to Haller X2 compactors.

Upper pin for the rollers on which the swivel-guide plate slides in Haller X2 compactors.

Each Haller X2 needs 2 short bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø65x60 mm height 60 mm expansive bushing for the guide plate upper pin in Haller X1 and X2 compactors

91110
Compatible with Haller original references 348249* / 126273* / 348.249* / 126.273* / 348 249* / 126 273*

Applicable to Haller X2 compactors.

Expansive bushing for the upper pins on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Each Haller X2 and X1 needs 4 bushings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø276x60 mm lower articulation pin for the swivel and guide plate of Haller X2 compactors

91115
Compatible with Haller original references 401050* / 401.050* / 401 050*

Applicable to Haller X2 compactors.

Lower pin for the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

Each Haller X2 needs 2 long pins.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø65x60 mm height 50 mm expansive bushing for the support of the guide plate pivot point in Haller X1 and X2 compactors

91111
91111_haller_348248_20160322163944
Compatible with Haller original references 348248* / 126272* / 348.248* / 126.272* / 348 248* / 126 272*

Applicable to Haller X1 and X2 compactors.

Expansive Cap for the lower bolts that moves the whole pala-trineo in compactors MSW Haller model X2.

Each Haller X2 and X1 needs 4 bushings

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø110x60x70 mm roller with bushing for the guide plate and swivel in Haller X1 and X2 compactors

91117
Compatible with Haller original references 404657* / 125438* / 5100881* /  404.657* / 125.438* / 510.0881* / 404 657* / 125 438* / 510 0881* 

Applicable to Haller X2 and X1 compactors.

Roller on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Each Haller X2 needs 4 rollers.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912

Drilled pin for the hydraulic cylinders eye rods of the swivel and guide plate in Haller X2 compactors

91112
91112_haller_401027_124991_5100876_401.027_124.991_510.0876_401_027_124_991_510.0876
Compatible with Haller original references 401027* / 124991* / 5100876* / 401.027* / 124.991* / 510.0876* / 401 027* / 124 991* / 510.0876*

Applicable to Haller X2 compactors.

Pin for the hydraulic cylinders eye rods that activate the swivel-guide plate movement in Haller X2 compactors.

Each Haller X2 needs 8 pins, 2 for each hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Safety plate to secure 91112 pin of the swivel and guide plate hydraulic cylinders in Haller X2 compactors

91113
Compatible with Haller original references 400309* / 124992* / 400.309* / 124.992* / 400 309* / 124 992*

Applicable to Haller X2 compactors.

Safety plate for the pin fitting for the hydraulic cylinders eye rods that activate the swivel-guide plate section movement in Haller X2 compactors.

Each Haller X2 needs 8 safety plates, 2 for each hydraulic cylinder

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

Inspection cover for the swivel and guide plate rollers in Haller X1 and X2 compactors

91118
Compatible with Haller original references 100821* / 100.821* / 100 821*

Applicable to Haller X1 and X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø80x60x10 mm felt ring for the swivel and guide plate rollers in Haller X1 and X2 compactors

91119
Compatible with Haller original references 366067* / 126211* / 366.067* / 126.211* / 366 067* / 126 211*

Applicable to Haller X1 and X2 compactors.

Supplementary felt ring for the rollers on which the swivel-guide plate section slides in Haller X1 and X2 compactors.

Each compactor Haller X 2 need 2 rings.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

2 mm equalizer disk for the pin of the guide plate roller in Haller X2 compactors

91120
Compatible with Haller original references 400634* / 400.634* / 400 634*

2 mm supplementary disk in case that you need to reduce spaces in pins of the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

3 mm equalizer disk for the pin of the guide plate roller in Haller X2 compactors

91121
Compatible with Haller original references 400635* / 400.635* / 400 635*

3 mm supplementary disk in case that you need to reduce spaces in pins of the rollers on which the swivel-guide plate section slides in Haller X2 compactors.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.

ø50 mm articulated joint bearing for the eye rods of the swivel and guide plate cylinders and the ejector cylinder in Haller X2 compactors

91123
91123_haller_348036_20160322163944
Compatible with Haller original references 348036* / 348.036* / 348 036*

Applicable to Haller X2 compactors.

Articulated joint bearing for the eye rods of the hydraulic cylinders that activate the swivel movement, the guide plate and the ejector hydraulic cylinder in Haller X2 compactors.

Each Haller X2 needs 4 bearings of ø50 mm for the tailgate elevation hydraulic cylinder.

For any questions or to place an order contact us by email info@teclimur.com or by phone +34 968 676912.